- Home /
- Plumbing /
- Pumps /
- Bronze Impellor Pumps /
- Johnson /
- Johnson Clutch Pumps /
- Johnson Clutch Pump F8B-5001
Shop Now
- Anchoring & Mooring
- Boat Maintenance
- Deck Hardware
- Electrical
- Fishing Equipment
-
General Equipment
- Cabin Hardware
- Coverings
- Galley
- Handles, Handrails & Fittings
- Hatch Hardware
- Marine Engineering
- Navigation
- Seat & Table Assemblies
- Ski Accessories
- Trailer Components
- Tube Clips
- Ventilators
- Windscreen Wipers & Accessories
- Marine Clothing
- Marine Electronics
-
Plumbing
- Fresh Water Systems
- Hose & Hose Accessories
- Pumps
- Toilet Systems
- Rigging Products
- Safety Equipment
-
Sailing Hardware
-
Blocks
- Harken
-
Ronstan
- Deck Organisers
- Lightweight Blocks
- Orbit Series Block Accessories
- Ronstan General Purpose Blocks
- Ronstan Wire Rope Blocks
- Series 100 Core Blocks
- Series 15 Ball Bearing
- Series 20 Ball Bearing
- Series 30 Orbit Blocks
- Series 40 All Purpose Blocks
- Series 40 Orbit BB Blocks
- Series 40 Orbit Blocks
- Series 40 Orbit Ratchet Blocks
- Series 50 All Purpose Blocks
- Series 55 Orbit Blocks
- Series 55 Orbit Ratchet Block
- Series 60 Core Blocks
- Series 70 Orbit Blocks
- Series 75 Core Blocks
- Sheave Boxes/Exit Blocks
- Snatch Blocks
- Utility Blocks
- Stainless Steel Hardware Blocks
- Boom Fittings
- Mast Tangs & Hounds
- Rope Stoppers
- Rudder & Tiller Fittings
- Saddles, Fairleads & Bushes
- Sail Furlers and Feeders
- Sail Slides, Hanks & Shackles
- Sheet Winches & Access.
- Shock Cord Ends & Tiedowns
- Spinnaker Pole Ends & Fittings
- Spreader/Mast Fittings
- Stay Adjusters
- Tiller Extensions and Uni Joints
- Trapeze Hardware
- Traveller Tracks
- Wind Direction Indicators
-
Blocks
- Sta-Lok Swageless Rigging Components
Johnson Clutch Pump F8B-5001
Description
Flexible impellor pumps provide an efficient solution to most marine
pumping needs. The primary advantage of them is their self-priming capability, followed by their ability to pump a wide range of liquids and even semi liquids.This range of pumps are for applications where greater strength and/or longer service are required. The pedestals are cast from iron for increased tensile strength and the bearing housings are seperate from the pump
bodies with a mechanical seal to ensure less wear and longer life. The stainless steel shafts are mounted with permanently lubricated double ball bearings to ensure smooth and long lasting operation. These pumps fitted with an electro-magnetic clutch which allows you to turn the pump on and off via a switch from a remote location such as the wheelhouse. They are available with a choice of voltage and pulley configurations. All models listed are fitted with a neoprene impellor.
BSP Ports: 1 1/2"
Output@1400rpm: 177LPM