- Home /
- Sailing Hardware /
- Rope Stoppers /
- Rope Clutches & Jammers /
- Spinlock Rope Clutches /
- SPINLOCK CLUTCH XCS 8-12MM DOUBLE
Shop Now
- Anchoring & Mooring
- Boat Maintenance
- Deck Hardware
- Electrical
- Fishing Equipment
-
General Equipment
- Cabin Hardware
- Coverings
- Galley
- Handles, Handrails & Fittings
- Hatch Hardware
- Marine Engineering
- Navigation
- Seat & Table Assemblies
- Ski Accessories
- Trailer Components
- Tube Clips
- Ventilators
- Windscreen Wipers & Accessories
- Marine Clothing
- Marine Electronics
-
Plumbing
- Fresh Water Systems
- Hose & Hose Accessories
- Pumps
- Toilet Systems
- Rigging Products
- Safety Equipment
-
Sailing Hardware
-
Blocks
- Harken
-
Ronstan
- Deck Organisers
- Lightweight Blocks
- Orbit Series Block Accessories
- Ronstan General Purpose Blocks
- Ronstan Wire Rope Blocks
- Series 100 Core Blocks
- Series 15 Ball Bearing
- Series 20 Ball Bearing
- Series 30 Orbit Blocks
- Series 40 All Purpose Blocks
- Series 40 Orbit BB Blocks
- Series 40 Orbit Blocks
- Series 40 Orbit Ratchet Blocks
- Series 50 All Purpose Blocks
- Series 55 Orbit Blocks
- Series 55 Orbit Ratchet Block
- Series 60 Core Blocks
- Series 70 Orbit Blocks
- Series 75 Core Blocks
- Sheave Boxes/Exit Blocks
- Snatch Blocks
- Utility Blocks
- Stainless Steel Hardware Blocks
- Boom Fittings
- Mast Tangs & Hounds
- Rope Stoppers
- Rudder & Tiller Fittings
- Saddles, Fairleads & Bushes
- Sail Furlers and Feeders
- Sail Slides, Hanks & Shackles
- Sheet Winches & Access.
- Shock Cord Ends & Tiedowns
- Spinnaker Pole Ends & Fittings
- Spreader/Mast Fittings
- Stay Adjusters
- Tiller Extensions and Uni Joints
- Trapeze Hardware
- Traveller Tracks
- Wind Direction Indicators
-
Blocks
- Sta-Lok Swageless Rigging Components
SPINLOCK CLUTCH XCS 8-12MM DOUBLE
Description
Spinlock Powerclutches have a low rope entry height, minimising friction on deck leads and blocks. They are suitable for all rope types with the cam and base gently gripping over a large area, reducing excessive wear. The cam profile is designed so that on release, the cam roll forward to back off the load, then disengages from the smoothest part of the cam. When the clutch is at maximum load, the cam rolls forward automatically, to ease the line instead of damaging the rope. The handles have a rubber insert to ensure that the opening action is positive and that accidental closing does not occur, with the handles also forward opening to minimise snagging by slack lines. As the holding power of clutches is in proportion to the rope diameter it is holding, a table is provided showing approximate loads that can be held at each diameter for each model. Localised sheathing of the rope at the grip position can significantly increase the holding load of the clutches.
Rope Size : 8-12mm